—- MJX HYPER GO 16208 —-
Introducing the MJX Hyper-Go 16208 off-road remote control monster trucks, These models offer exceptional reliability and exhilarating high-speed performance all packed into a highly portable 1/16th size model. Each vehicle features top quality components using 2.4ghz radio equipment and powerful LiPo batteries to provide a thrilling RC experience.

Well this was my first RC Car and i learned alot from it. Its been bashed to death. new bumpers, diffs and body just to name a few. Its been a blast to play with. Even chased it with my drones.
Key Features
★ Fully built and ready to run – just add two AA batteries for the remote control
★ Top speed of 65KPH using the 3S 11.1v battery or 45KPH using the 2S 7.4v battery
★ LED lights operated by the remote control
★ 2845 brushless motor with 45A Waterproof ESC
★ 2.4GHz radio system allows multiple models to be run at the same time
★ 4WD drive system complete with metal differentials and drive shafts
★ Oil filled aluminium capped shock absorbers
★ Water resistant and dust-proof electronics
★ Anti-skid high grip rubber tyres and wheels
★ High quality crack-resistant body shell included
★ USB battery charger included for convenient charging
★ Wheel wrench and screw driver included








The 16208 was my first car and the poor thing has has it all, New Steel Diffs for stronger ones, I have only run this car on 3s. So the factory Diffs do not last long. I have Replaced the rear springs after a hard landing. its had a new motor fan, i replaced it with a stock fan. i do need to find a better one. the battery holder has been replaced with a larger holder to accommodate the bigger battery. The first brake i had was the steering arm. my parts list is growing nicely. The parts i have listed is the parts i have actually what i have used.
Over all this MJX has served me very well and opened the door to the hobby for me at the time of writing this i now have 5 of these, I am thinking of upgrading this one to a full aluminium build for show.



—- Repairs —-

The repairs list is getting long so i have added the videos to the parts below in comments, my most recent repair is the front diff above. This was very challenging because i did not tighten up the screws enough on the diff so when i had put it all together to drive felt very loose so the next day i had the front diff apart again double checking everything.
-
After breaking the Shocks at the back i purchased these. link below
MJX H16 16207 16208 16209 16210 4pcs Metal Front and Rear Shock Absorber 1/16 RC Car Upgrades Parts Accessories
-
i smashed the locking clip off so replaced it with this link below
-
MJX RC Hyper Go Remote Control Car Parts For 16208 16209 16210 Modified Accessories Car shell and car shell change
-
2Piece RC Car Front Upper Arm 16210 For MJX Hyper Go 16207 16208 16209 16210 H16 H16H H16E H16P 1/16 RC Car Spare Parts
-
Metal Hex Screws Set MJX H14BM 14209 14210 H16 16207 16208 16209 16210 Repair Tools For 1/14 1/16 80% Spare Screw RC Car Parts
-
RC Car Axle Gear Grease CVD Gearbox Differential Lubricant Noise Reduction Lubricating
-
MJX Hyper Go Original Replacement Spare Parts 3S Battery Motor ESC Accessories For 16207 16208 16209 16210 Brushless RC Truck
https://a.aliexpress.com/_EIugGrS
Code 16420Y(steel)
-
MJX Hyper Go Original Replacement Spare Parts 3S Battery Motor ESC Accessories For 16207 16208 16209 16210 Brushless RC Truck
https://www.aliexpress.com/item/1005004802075173.html
Code : – 16401Y(steel)
-
MJX Hyper Go Original Replacement Spare Parts 3S Battery Motor ESC Accessories For 16207 16208 16209 16210 Brushless RC Truck
https://www.aliexpress.com/item/1005004802075173.html
Code:- 16402(steel)
-
-
AINY Rear Bumper 16110 for MJX Hyper Go 16207 16208 16209 16210 H16 H16H H16E H16P 1/16 RC Car Spare Parts
-
-
12Mm Hex Wheel Hub Set Of 4 For MJX 1/14 1/16 Scale Models 14210 14303 16207 16208 RC Cars
-
For Gopro Hero Accessories Adhesive Mounts Curved Flat Sticker Sticky Pads Helmet For Go Pro Insta360 X3 Dji Osmo Action camera
-
10pcs Buckle Clip Basic Mount for Gopro Go Pro Hero 12 11 10 9 8 7 5 4 Accessories Case Helmet for XiaoMi yi camera accessories
-
Waiting to fit this. Fingers crossed goes well
-
This is what i broken, battery holder. Im hopping the metal one fits better
link here
Leave a Reply