—- MJX HYPER GO 16208 —-
Introducing the MJX Hyper-Go 16208 off-road remote control monster trucks, These models offer exceptional reliability and exhilarating high-speed performance all packed into a highly portable 1/16th size model. Each vehicle features top quality components using 2.4ghz radio equipment and powerful LiPo batteries to provide a thrilling RC experience.
Well this was my first RC Car and i learned alot from it. Its been bashed to death. new bumpers, diffs and body just to name a few. Its been a blast to play with. Even chased it with my drones.
Key Features
★ Fully built and ready to run – just add two AA batteries for the remote control
★ Top speed of 65KPH using the 3S 11.1v battery or 45KPH using the 2S 7.4v battery
★ LED lights operated by the remote control
★ 2845 brushless motor with 45A Waterproof ESC
★ 2.4GHz radio system allows multiple models to be run at the same time
★ 4WD drive system complete with metal differentials and drive shafts
★ Oil filled aluminium capped shock absorbers
★ Water resistant and dust-proof electronics
★ Anti-skid high grip rubber tyres and wheels
★ High quality crack-resistant body shell included
★ USB battery charger included for convenient charging
★ Wheel wrench and screw driver included
The 16208 was my first car and the poor thing has has it all, New Steel Diffs for stronger ones, I have only run this car on 3s. So the factory Diffs do not last long. I have Replaced the rear springs after a hard landing. its had a new motor fan, i replaced it with a stock fan. i do need to find a better one. the battery holder has been replaced with a larger holder to accommodate the bigger battery. The first brake i had was the steering arm. my parts list is growing nicely. The parts i have listed is the parts i have actually what i have used.
Over all this MJX has served me very well and opened the door to the hobby for me at the time of writing this i now have 5 of these, I am thinking of upgrading this one to a full aluminium build for show.
—- Repairs —-
The repairs list is getting long so i have added the videos to the parts below in comments, my most recent repair is the front diff above. This was very challenging because i did not tighten up the screws enough on the diff so when i had put it all together to drive felt very loose so the next day i had the front diff apart again double checking everything.
After breaking the Shocks at the back i purchased these. link below
MJX H16 16207 16208 16209 16210 4pcs Metal Front and Rear Shock Absorber 1/16 RC Car Upgrades Parts Accessories
Video doing the repair using the shocks
i smashed the locking clip off so replaced it with this link below
MJX RC Hyper Go Remote Control Car Parts For 16208 16209 16210 Modified Accessories Car shell and car shell change
2Piece RC Car Front Upper Arm 16210 For MJX Hyper Go 16207 16208 16209 16210 H16 H16H H16E H16P 1/16 RC Car Spare Parts
Metal Hex Screws Set MJX H14BM 14209 14210 H16 16207 16208 16209 16210 Repair Tools For 1/14 1/16 80% Spare Screw RC Car Parts
RC Car Axle Gear Grease CVD Gearbox Differential Lubricant Noise Reduction Lubricating
MJX Hyper Go Original Replacement Spare Parts 3S Battery Motor ESC Accessories For 16207 16208 16209 16210 Brushless RC Truck
MJX Hyper Go Original Replacement Spare Parts 3S Battery Motor ESC Accessories For 16207 16208 16209 16210 Brushless RC Truck
MJX Hyper Go Original Replacement Spare Parts 3S Battery Motor ESC Accessories For 16207 16208 16209 16210 Brushless RC Truck
https://www.aliexpress.com/item/1005004802075173.html
Code:- 16402(steel)
AINY Rear Bumper 16110 for MJX Hyper Go 16207 16208 16209 16210 H16 H16H H16E H16P 1/16 RC Car Spare Parts
This is the video on how to change out the bumper above.
12Mm Hex Wheel Hub Set Of 4 For MJX 1/14 1/16 Scale Models 14210 14303 16207 16208 RC Cars
For Gopro Hero Accessories Adhesive Mounts Curved Flat Sticker Sticky Pads Helmet For Go Pro Insta360 X3 Dji Osmo Action camera
10pcs Buckle Clip Basic Mount for Gopro Go Pro Hero 12 11 10 9 8 7 5 4 Accessories Case Helmet for XiaoMi yi camera accessories
Waiting to fit this. Fingers crossed goes well
This is what is broken, battery holder. Im hopping the metal one fits better
link here
I don’t think this oil is thick enough for diffs but I’m going to give it a try
Share : https://13a.uk/dqy0
Leave a Reply